Skip to content Skip to navigation menu

TSM23 Series Integrated Step-Servo MotorsThe Step-Servo is an innovative revolution for the world of stepper motor, it enhances the stepper motors with servo technology to create a product with exceptional feature and broad capability.TSM is MOONS’ 3rd generation integrated Step-Servo and compact motor+drive+encoder+controller all-in-one solution. With improved technology, TSM upgrades significant key features based on 2nd generation SSM and operates more efficient and intelligent.

TSM23 Series Integrated Step-Servo Motors
The Step-Servo is an innovative revolution for the world of stepper motor, it enhances the stepper motors with servo technology to create a product with exceptional feature and broad capability.TSM is MOONS’ 3rd generation integrated Step-Servo and compact motor+drive+encoder+controller all-in-one solution. With improved technology, TSM upgrades significant key features based on 2nd generation SSM and operates more efficient and intelligent.
● Multi-axis field bus control
● Intelligent built-in controller
● Compact all-in-one solution
● Efficient, smooth, accurate, fast
● Enhanced motor, optimized design
Brand Name: MOONS'
Price: N/A
Payment Methods:

Certificates:
Buyer Protection:
Free Exchange if the item has quality problems within 1 year. Learn more

Description

The Step Servo is an innovative revolution for the world of stepping motor, it enhances the stepping motor with servo technology to create a product with exceptional feature and broad capability.TSM is MOONS’ 3rd generation integrated step-servo and compact motor+drive+encoder+controller all-in-one solution. With improvedm technology, TSM upgrades significant key features based on 2nd generation SSM and operates more efficiently and intelligently.

Features

Closed Loop·Very tight position and velocity control for the most demanding applications
·Robust servo loops that tolerate wide fluctuations in load inertia and frictional loading.
·The TSM17/23/24/34 achieve precise positioning to within ±1 count (0.018°) using a high resolution (20000 counts/rev) encoder
·The TSM11 achieves precise positioning to within ±1 count (0.2°) using a high resolution (4096 counts/rev) encoder.
Easy Tuning ·Pre-defined tuning parameters for maximum control performance and stability.
·Easy selection list provides the level of control desired. 
·In most cases NO extra manual tuning is required.
Lower Heating/High Efficiency·Uses only the current required by the application, generating minimum heat output.
·When stand-still, current can reach nearly zero for extremely low heat output.
·Being able to use almost 100% of torque, allows for more efficient and compact motor usage.
Smooth & Accurate·Space vector current control with 5000 line high resolution encoder, gives smooth and quiet operation, especially at low speeds.
------A feature never found with traditional stepper motors
·High stiffness due to the nature of the stepper motor combined with the highly responsive servo control
------Accurate position control both while running and static positioning
Fast ResponseWhen performing fast point-to-point moves, the high torque output and advanced servo control provides a very responsive system far exceeding what can be done with a conventional stepper system.
High Torque·Because the SSM operates in full servo mode, all the available torque of the motor can be used. The motor can provide as much as 50% more torque in many applications. High torque capability often eliminates the need for gear reduction.
·Boost torque capability can provide as much as 50% more torque for short, quick moves.
Motion Monitoring·For difficult control situations where performing a precise move is necessary, the Step-Setvo Quick Tuner provide an easy to use interface for performing and monitoring the motion profile
·Many common parameters such as Actual Speed or Position Error can be monitored to evaluate system performance
·The monitoring is interactive with the servo tuning capability so that optimum performance can be achieved.
Key Enhancement based on SSM family·Up to 8 digital inputs, 4 digital outputs and 1 analog input for S/Q/C types ( TSM17/23/24/34 only )
·A/B/Z differential encoder signal output supported for P type ( TSM17/23/24/34 only )
·Automatic load inertia detection
·On board daisy chain connection for field bus control (RS-485, Modbus/RTU, CANopen, TSM17/23/24/34 only)
·On board daisy chain over Ethernet  ( TSM34 only )
·Multiple homing features for S/Q types
·Software limit for S/Q types
·Auxiliary power input for Keep Alive function (TSM34 only)

Model Numbering System

Ordering Information 

Model Torque Control I/O(*) RS-232 RS-485/422 Modbus/RTU CANopen
TSM23P-2AG 1.0N·m P 4DI,3DO,EO      
TSM23S-2AG S 8DI,4DO,1AI,EO      
TSM23S-2RG      
TSM23Q-2AG Q    
TSM23Q-2RG    
TSM23C-2CG C 8DI,4DO,1AI    
TSM23P-3AG 1.5N·m P 4DI,3DO,EO      
TSM23S-3AG S 8DI,4DO,1AI,EO      
TSM23S-3RG      
TSM23Q-3AG Q      
TSM23Q-3RG    
TSM23C-3CG C 8DI,4DO,1AI    
TSM23P-4AG 2.5N·m P 4DI,3DO,EO      
TSM23S-4AG S 8DI,4DO,1AI,EO      
TSM23S-4RG      
TSM23Q-4AG Q    
TSM23Q-4RG    
TSM23C-4CG C 8DI,4DO,1AI    

Power Amplifier

Amplifier Type Dual H-Bridge, 4 Quadrant
Current Control 4 state PWM at 20 KHz
Output Torque TSM23C-2CG: Up to 1.0N•m Continuous(1.3 N•m Boost)
TSM23C-3CG: Up to 1.5N•m Continuous(2.0 N•m Boost)
Power Supply External 12 - 70 VDC power supply required
Protection Over-voltage, under-voltage, over-temp, motor/wiring shorts (phase-to-phase, phase-toground)

Controller

Electronic Gearing Software selectable from 200 to 51200 steps/rev in increments of 2 steps/rev
Encoder Resolution 20000 counts/rev
Speed Range Up to 3600rpm
Filters Digital input noise filter, Smoothing filter, PID filter, Notch filter
Non-Volatile Storage Configurations are saved in FLASH memory on-board the DSP
Modes of Operation CANopen slave node plus stored Q Program execution
Digital Inputs Digital Inputs Adjustable bandwidth digital noise rejection filter on all inputs
X1/X2/X7/X8: Optically isolated, 5-24 volt differential or single-ended input, Minimum pulse width = 100 μs, Maximum pulse frequency = 5 KHz
Function: general purpose input, or CW/CCW Limit input
X3/X4X5/X6 : Optically isolated, 5-24 volt single-ended input, Minimum pulse width = 100 μs, Maximum pulse frequeny = 5 KHz
Function: Servo on/off, Alarm/Fault Reset, or general purpose input
Digital Output Y1/Y2/Y3/Y4: Optically isolated, 30V/100mA max Open Collector Output.
Function: Alarm/Fault, In Position(dynamic/static), Brake Control, Tach out, Timing out, or
general purpose usage
Communication
Interface
CANopen & RS-232

Physical

Ambilent Temperature 0 to 40°C (32 to 104°F) When mounted to a suitable heatsink
Humdity 90% Max., non-condensing
Mass TSM23C-2CG: 850 g
TSM23C-3CG: 1200 g
Rotor Inertia TSM23C-2CG:260 g•cm2
TSM23C-3CG:460 g•cm2

Compare Item Price
(USD)
Buy Now
TSM23S-2AG
TSM23S-3AG
TSM23P-2AG
TSM23P-3AG
TSM23Q-4RG
TSM23S-4RG
TSM23S-3RG
TSM23Q-3AG
TSM23Q-2AG
TSM23S-2RG
TSM23Q-2RG
TSM23Q-3RG
TSM23C-2CG
TSM23C-3CG
TSM23P-4AG
TSM23S-4AG
TSM23Q-4AG
TSM23C-4CG

Dimension (Units: mm) 


Model
“L”
“M”
Front Shaft Diameter
TSM23□-2□G
95.2
24.5
8
TSM23□-3□G
117.2
46.5
TSM23□-4□G
120.6
49.9
* 6.35 mm diameter shaft available upon request

2D Drawings
Title Type Size(KB) Date View times Download
TSM23S-3AG_2D Drawing.pdf PDF 52 2017-05-18 6
TSM23C-3CG_2D Drawing.pdf PDF 77 2017-05-18 4
TSM23S-2AG_2D Drawing.pdf PDF 52 2017-05-18 2
TSM23S-3AG_2D Drawing.dwg DWG 261 2017-05-18 2
TSM23C-2CG_2D Drawing.pdf PDF 79 2017-05-18 2
TSM23P-3AG_2D Drawing.pdf PDF 52 2017-05-18 1
TSM23S-2RG_2D Drawing.dwg DWG 251 2017-05-18 1
TSM23S-2RG_2D Drawing.pdf PDF 47 2017-05-18 1
TSM23C-3CG_2D Drawing.dwg DWG 223 2017-05-18 1
TSM23Q-3AG_2D Drawing.pdf PDF 52 2017-05-18 1
TSM23P-3AG_2D Drawing.dwg DWG 261 2017-05-18 0
TSM23Q-2AG_2D Drawing.dwg DWG 261 2017-05-18 0
TSM23Q-2AG_2D Drawing.pdf PDF 52 2017-05-18 0
TSM23Q-2RG_2D Drawing.dwg DWG 153 2017-05-18 0
TSM23C-2CG_2D Drawing.dwg DWG 224 2017-05-18 0
TSM23Q-2RG_2D Drawing.pdf PDF 47 2017-05-18 0
TSM23S-3RG_2D Drawing.dwg DWG 251 2017-05-18 0
TSM23Q-3AG_2D Drawing.dwg DWG 261 2017-05-18 0
TSM23S-3RG_2D Drawing.pdf PDF 47 2017-05-18 0
TSM23Q-3RG_2D Drawing.dwg DWG 153 2017-05-18 0
TSM23P-2AG_2D Drawing.dwg DWG 159 2017-05-18 0
TSM23Q-3RG_2D Drawing.pdf PDF 47 2017-05-18 0
TSM23P-2AG_2D Drawing.pdf PDF 52 2017-05-18 0
TSM23S-2AG_2D Drawing.dwg DWG 261 2017-05-18 0
3D Model
Title Type Size(KB) Date View times Download
TSM23C-3CG_3D Model.step STEP 4818 2017-05-18 4
TSM23S-3AG_3D Drawing.step STEP 3837 2017-05-18 3
TSM23P-3AG_3D Drawing.step STEP 3837 2017-05-18 3
TSM23Q-3AG_3D Drawing.step STEP 3837 2017-05-18 2
TSM23S-2RG_3D Drawing.step STEP 3795 2017-05-18 2
TSM23S-3RG_3D Drawing.step STEP 3752 2017-05-18 2
TSM23Q-2AG_3D Drawing.step STEP 3845 2017-05-18 1
TSM23Q-3RG_3D Drawing.step STEP 3752 2017-05-18 1
TSM23Q-2RG_3D Drawing.step STEP 3795 2017-05-18 0
TSM23S-2AG_3D Drawing.step STEP 3845 2017-05-18 0
TSM23C-2CG_3D Drawing.step 4856 2017-05-18 0
TSM23P-2AG_3D Drawing.step STEP 3845 2017-05-18 0
Brochure
Title Type Size(KB) Date View times Download
TSM23 Series_Brochure.pdf PDF 4113 2017-05-18 19
User Manual
Title Type Size(KB) Date View times Download
TSM23Q/S_User Manual.pdf PDF 2692 2017-05-18 32
TSM23P_User Manual.pdf PDF 1942 2017-05-18 8
TSM23C_User Manual.pdf PDF 2407 2017-05-18 7
Certification
Title Type Size(KB) Date View times Download
TSM23 Series_CE.pdf PDF 1123 2017-05-18 4
TSM23 Series_RoHS.pdf PDF 230 2017-05-18 4
Software
Title Type Size(KB) Date View times Download
RS485 Bus Utility Setup 1.0.16.0729_Software.rar RAR 1834 2017-06-14 38
CANopen Test Tool 1.0.16.0704_Software.rar RAR 4768 2017-06-14 28
Step-Servo Quick Tuner Setup 3.0.17.0512.rar RAR 3234 2017-06-08 16

Delivery & Packaging

Ensure your ordered products are always safely packaged from easy click to
fast delivery to your hands

Fast Delivery

Fast Cross-Border Delivery MOONS' chooses DHL as our main international express shipping partner. As the world's leading logistics specialist, DHL provides our customers with fast and professional inter- national door-to-door delivery service.
Estimated Delivery Time: e.g. China-USA major cities 3 business days.

Safely Packaging

In order to ensure your shipments withstand the long trip and arrive safely and intact, MOONS' specially designed Individual package to pass the drop test with its stable structure. Besides, the package is made from recyclable materials, providing you with professional safety delivery.

Professional Product Label

Considering all possible harsh application environments, MOONS' specially designed label for each product, which passes water-resistance test, durability rub test, high temperature resistance and corrosion resistance tests.

Tip: This label design is suitable for products of stepper motor.