ME035HxxxAQ_CLKS series is a 50W LED AC-DC driver featuring the constant current mode. This series operates from 176~305VAC and offers dimming models with different rated current that could be configured by MOONS' patented programmer--MSSL200. ME035HxxxAQ_CLKS is equipped with various dimming function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Dimming Function Introduction
ME035HxxxAQ_CLKS is a programmable driver, all driver's parameters can be modified through MSSL200 (The Programmer of CLKS or CP Series driver), such as output current value, start time, fade up time, selecting dimming mode (include modifying parameters in corresponding mode) and so on, which can meet other special and customized requirement, such as 50W/500mA, 50W/600mA, 50W/700mA and so on.
1. Accessory-MSSL200 (Optional)
MSSL200 is the programmer of CLKS or CP Series driver. The Programmable Driver Configurator Software and Configurator are compatible with MOONS' CLKS and CP drivers. They can be used to set the configuration parameters of MOONS' CLKS and CP drivers.
The Hardware Connection
Configurator Interface and Introduction
2. Dimming Function-PWM/1-10V Dimming
Dimming Range: 10%∼ 100% ×rated output current
The CP series are perfectly compatible with PWM/1-10V signal dimmer. Enter the "PWM dimming mode" or "1-10V dimming mode", you can modify the minimum and maximum output parameters and corresponding voltage of dimming signal voltage.
3. Dimming Function-Smart Midnight ClockDIM
Smart Midnight ClockDIM has self-study Clock Dimming function. It can set 5 dimming level in the dimming plan through software. It also can adjust the starting time and ending time in the dimming plan everyday automatically according to the geographic position and average operating time. In other words, the CP series driver can adapt to the changeable starting and ending time due to the seasonal alteration by self-study function.
Smart Midnight ClockDIM Interface
4. Dimming Function-Fixed ClockDIM
Users can set the dimming plan by separating 24 hours into 5 sections matching corresponding output current. Owing to the time is fixed, it has no self-study function. For instance: Assuming the dimming plan like below table shows. If the driver is charged at 15:00pm, the driver will perform the dimming plan following the form shows.
Fixed ClockDIM Interface
The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Different form factors are available for the perfect fit with your luminaire.