Textile Manufacturing
Textile machines are used for processing natural fiber and chemical fiber into textiles. Due to the adjustment of textile product structure and market demand, modern textile machines tend to standardize, serialize, and universalize the procedure which should be high speed, high efficiency, and maintenance-free as well as low consumption, low noise, and low pollution, to achieve manufacturability, continuity and completeness.
Worldwide, driven by the market demand, the industrial competition has shifted from textile manufacturing powers like German, Italy, and Switzerland to the Asian market, among which China has grown into the most leading textile manufacturing nation in the world.
Meanwhile, various machines are required due to different procedures. There are three types of machine as follows in terms of manufacturing function. Typical Application of MOONS' Products in Textile Industry
MOONS’ has rich experience in textile industry and has formed complete design solution, which can make sure high performance and reliability of textile equipment in different process.
Application: Cotton Traction Controller; Cotton Terminal; Replace Tubes of Spooling; Cotton Waxing; Tension Controller; Roller Motor
Products: 17HD/23HS/24HS 2-Phase Stepper Motor
Application: Cotton Traction Controller; Scissor Controller; Density Controller
Products: 17HD/23HS/24HS 2-Phase Stepper Motor
Application: X/Y-axis Feeding Control; Z-axis Cycloidal Pin Control;
Scissor Controller; Presser Foot Lift Control
Products: 23HS/24HS/34HD 2 Phase Stepper Motor; PL Series Advanced Technologies of MOONS' Products
It’s essential to keep the humidity at 75%~85% because yarn will become brittle and are more likely to break in the dry environment. But excessively high humidity will also accumulate flying and hairiness, which will absorb bearing grease.
• Special Design of Bore and Shaft
Relative movement between bearing bore and shaft during operation will cause friction and heat, affecting service life of bearing.
• Special Design of Bore and Shaft
• Due to reciprocating and high speed operation of bearing in small angle under radial and axial load, ball will constantly hit the bearing grooves, which will cause abrasion and noise and shorten its service life.
• Due to reciprocating and high speed operation of bearing in small angle under radial and axial load, ball will constantly hit the bearing grooves, which will cause abrasion and noise and shorten its service life.
• Low Power Consumption; Low Temperature Rise; Long Life
Continuous operation and radial pressure will shorten motors’ longevity.
MOONS' Advantage in Textile Industry
• Technological Advantage
1.Low inertia rotor of ML Series: Improve the performance
2.Ultra high torque of PL Series(with high pressure driving control system): High efficiency; Low power consumption; Low temperature rise
3.Closed loop design(with dust proof and long-life bearing): High reliability; Long service life; Low temperature rise; Higher response frequency; Higher speed; Reasonable system cost
4.Linear transmission and application:Belt drive; Lead screw drive; Linear motor solution
• MOONS’ Products
JET Disc Stepper Motor
Applied in yarn guiding mechanism of textile machine, JET disc stepper motor provides quick and accurate position and motion control solution.