Skip to content Skip to navigation menu
Configure
Clear all

Price

Flexible Couplings 

High Torsional Rigidity, High Torque, High Accuracy, High Durability, Backlash 0, Low Inertia Moment, Small Size
     
  • Double Disk Flexible Coupling

    Double Disk Flexible Coupling

    High Torsional Rigidity, High Torque, High Accuracy, High Durability, Backlash 0, Low Inertia Moment, Small Size
    Brand:
  • Item Shaft Diameter
    (mm)
    Phase Shaft No Load Speed
    (rpm)
    No Load Current
    (mA)
    Supply Voltage RS232 RS485 CAN Bus Ethernet Control Modes Output Current
    (A)
    Frame Size Motor Length
    (mm)
    Rated Current
    (A)
    Screw Diameter
    (mm)
    Screw Lead
    (mm)
    Screw Length
    (mm)
    Linear Travel per Step
    (mm)
    Rated Thrust
    (N @300RPM)
    Length
    (mm)
    Rated Voltage Max. Speed
    (rpm)
    Rated Torque
    (Nm)
    Peak Torque
    (Nm)
    Rated Torque
    (mNm)
    Max. continuous torque
    (mNm)
    Rated Current
    (A)
    Max. continuous current
    (A)
    Holding Torque
    (Nm)
    Holding Torque
    (mNm)
    Holding Torque
    (oz-in)
    Reduction Ratio Coil Type Speed/Torque Gradient
    (rpm/mNm)
    Rotor Inertia
    (oz-in²)
    Communication Ports Encoder Feedback Input Voltage V_in
    (Vac)
    Efficiency (230Vac) Efficiency (480Vac) P_out
    (W)
    V_out
    (Vdc)
    Driver Type V_out
    (V)
    I_out
    (mA)
    Dimming Mode Maximum Output Current
    (A)
    Connection Method Rated torque
    (Nm)
    Input shaft diameter
    (mm)
    Full load efficiency Backlash
    (arc-min)
    Brake UL Type AWG Size Length
    (mm(in))
    Number Of Leads Housing Terminal Inner Diameter
    (mm)
    Reference Circle
    (mm)
    Threaded Through-holes Thickness
    (mm)
    Rubber Materials Skeleton Materials Application Maximum Torque Capacity
    (Nm)
    Shaft Hole Diameter d1
    (mm)
    Shaft Hole Diameter d2
    (mm)
    Outer Diameter
    (mm)
    Length
    (mm)
    Modules(M) & Diametral Pitch(P) Belt Type Pulley Width
    (mm)
    Number of Teeth Alterations Pressure Angle Reference Diameter
    (mm)
    Inner diameter
    (mm)
    Material Cable Length
    (cm)
    Speed control range
    (rpm)
    Under voltage protection
    (V)
    Input signals voltage
    (V)
    Motor Type Belt Circumference Length
    (mm)
    Belt Width
    (mm)
    Weight
    (kg)
    Installation Width
    (mm)
    Effective stroke
    (mm)
    Rated Axial Thrust
    (N)
    Rating Feed Speed
    (mm/sec)
    Screw Lead
    (mm)
    Repetitive Positioning Accuracy
    (μm)
    Lost Motion
    (μm)
    Power supply
    (V)
    Current consumption
    (mA)
    Output high level
    (V)
    Output low level
    (V)
    Output current
    (mA)
    Sleeves Category Temperature Detection Self Status Check Interval Collection Order Collection Mode Ethernet Switch Function Dual Channel Vibration Measurement RPM. Measurement Dynamic Balance (2 planes) Bump Testing Electrical Signal Detection USB Host (Mass Storage/Mouser/Keyboard) USB Slave Communication WIFI Communication Ethernet Communication Manufacturer Lot Number Type Number of Positions RoHS Compliant Reduction Ratio IP Rating Braking Torque
    (Nm)
    Rated Power
    (W)
    Response Time
    (ms)
    Step Angle Rated Current
    (A)
    Rotor Inertia
    (gcm²)
    Keyway Shaft Brake Torque
    (Nm)
    Brake Power
    (V(W))
    Encoder Type Reduction Ratio Heat Sink Output Current, Continuous
    (A)
    Motor Output Rotor Inertia
    (gcm²)
    Rotor Poles Output Current, Peak
    (A)
    Double Shaft Rotating Speed
    (rps)
    Positioning Repeatability
    (mm)
    Maximum travel range
    (mm)
    Maximum Horizontal Load
    (kg)
    Maximum Vertical Load
    (kg)
    Length-Width-Height
    (mm)
    Maximun Travel Speed
    (mm/sec)
    Motor's Type Application Mounting Type Description Nominal Voltage Price
    (USD)
    Compare
  • Curved Jaw Flexible Coupling

    Curved Jaw Flexible Coupling

    High Torsional Rigidity, High Torque, High Accuracy, High Durability, Low Inertia Moment, Small Size
    Brand:
  • Item Maximum Torque Capacity
    (Nm)
    Shaft Hole Diameter d1
    (mm)
    Shaft Hole Diameter d2
    (mm)
    Outer Diameter
    (mm)
    Length
    (mm)
    Price
    (USD)
    Compare
    LK20-20-5-5 2.8 5 5 20 30
    $13.40
    LK20-20-5-6 2.8 5 6 20 30
    $13.40
    LK20-20-5-8 2.8 5 8 20 30
    $13.40
    LK20-20-6-10 2.8 6 10 20 30
    $13.40
    LK20-20-6-9.525 2.8 6 9.525 20 30
    $13.40
    LK20-20-6.35-10 2.8 6.35 10 20 30
    $13.40
    LK20-20-6.35-5 2.8 6.35 5 20 30
    $13.40
    LK20-20-6.35-6 2.8 6.35 6 20 30
    $13.40
    LK20-20-6.35-6.35 2.8 6.35 6.35 20 30
    $13.40
    Show more