PLC Series 

The PLC gateway is primarily used for monitoring the main power circuits on site and for data exchange between node controllers and the server. It is usually installed in the on-site distribution cabinet or control box. It receives commands from the server to perform on/off operations on the circuits and can also upload the collected data to the server. In the event of a server or network failure, it can operate standalone, continuing to control the node controllers according to the preset schedule that was previously issued. This ensures that the luminaires will not become uncontrollable.

Brand:MOONS'

The PLC series node controllers are used for direct control of streetlights,industrial lighting,or tunnel lights.They can perform on/off and dimming control of the luminaires based on instructions from the gateway.At the same time,they can monitor the operating status of the luminaires(such as dimming level,power,voltage,current,etc.)and report this information back to the gateway.When the connection to the gateway is lost,the node controller can still automatically control the luminaires according to the preset schedule or astronomical clock.

Brand:MOONS'

Sensor products are used for detecting human movement and ambient illuminance in streetlights and industrial lighting. When used in conjunction with node controllers, they can report human movement signals and ambient illuminance values to the node controllers. This enables the control of dimming/on-off of the luminaires, achieving the function of lights turning on when people are present and turning off when they leave, for individual lamps or groups of lamps.

Brand:MOONS'