MU240RxxxAQ_CP series is a 240W LED AC-DC driver featuring the constant current mode. This series operates from 90~305VAC and offers dimming models with different rated current that could be configured by MOONS' patented programmer--MSSL200.With the fan-less design, the entire series are able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP65 ingress protection level allows this series to fit both indoor and outdoor applications. MU240RxxxAQ_CP is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
High Surge Immunity
MOONS' have developed a range of LED drivers subject to IEC 61000-4-5, that is a test for electrical and electronic equipment with regard to unidirectional surges caused by over-voltages from switching and lightning transients. With L-N: ±4kV, L,N-FG: ±6kV surge level, the MOONS' LED drivers are reliable to protect your lamps against surges.
As a professional LED driver developer, our teams take care of these issues for our customers.
Dimming Function Introduction
MU240RxxxAQ_CP is a programmable driver, all driver's parameters can be modified through MSSL200 (The Programmer of CLKS or CP Series driver). Such as output current value, start time, fade up time, selecting dimming mode (include modifying parameters in corresponding mode) and so on, which can meet other special and customized requirement, such as 240W/1000mA, 240W/2000mA, 240W/3000mA and so on. What's more, the driver is compatible with charged or uncharged programming mode.
MSSL200 is the programmer of CLKS or CP Series driver.The Programmable Driver Configurator Software and Configurator are compatible with MOONS' CLKS and CP drivers. They can be used to set the configuration parameters of MOONS' CLKS and CP drivers.
2. Dimming Function-Constant Power
Output Current: 65%～100% ×rated output current This series driver could achieve rated output power while adjusting output current range at 65%-100% rated output current.
Note：output current setting range with constant power 65%～100% Iomax
3. Dimming Function-PWM/1-10V Dimming
Dimming Range: 6.5%～100% ×rated output current The CP series are perfectly compatible with PWM/1-10V signal dimmer. Enter the "PWM dimming mode" or "1-10V dimming mode", you can modify the minimum and maximum output parameters and corresponding voltage of dimming signal voltage.
4. Dimming Function-Smart Midnight ClockDIM
Smart Midnight ClockDIM has self-study Clock Dimming function. It can set 5 dimming level in the dimming plan through software. It also can adjust the starting time and ending time in the dimming plan everyday automatically according to the geographic position and average operating time. In other words, the CP series driver can adapt to the changeable starting and ending time due to the seasonal alteration by self-study function.
5. Dimming Function-Fixed ClockDIM
Users can set the dimming plan by separating 24hours into 5 sections matching corresponding output current. Owing to the time is fixed, it has no self-study function. For instance: Assuming the dimming plan like below table shows. If the driver is charged at 15:00pm, the driver will perform the dimming plan following the form shows.